Choose Your Size - Shark EvoLine series3 Manual De Instrucciones

warnInG:
protect the wearer from all
foreseeable high or low speed
impacts. however, for maximum
protection, the helmet must be
of proper fit and the chin strap must
be securely fastened as described in
this manual. Failure to have a proper
fit and to securely fasten the chin
strap is dangerous, as the helmet
could come off in an accident, resul-
ting in severe head injury or death.

ChoosE Your sIzE

Each helmet is designed to corres-
pond to a head measurement (from for
XS up to XL). To measure your head
size, wrap a tape measure horizon-
tally around your head at a height of
approximately one inch (2.5cm) above
your eyebrows. If your head measure-
ment falls between two sizes, first
erManualEvoCarbon.indd 11
no helmet can
ChoosE Your sIzE
try on the smaller helmet. However,
because of different head shapes, this
size reference can only be considered
as a guide. For maximum protection,
it is necessary to check that the hel-
met is well suited for the shape of
your head. When trying a brand new
helmet, make sure that your head is
pushed into the helmet as far as pos-
sible, with the front part just above
your eyebrows, and with the chin strap
securely fastened as described on the
next page.
1. The helmet should feel very snug all
around your head and fairly tight on the
cheek pads. If not, it is too big for you;
select a smaller size.
See figure A.
2. With the chin strap properly faste-
ned (see page 6), be sure that the hel-
met cannot be moved excessively from
side to side or up and down.You should
11
B
24/07/14 16