5
Hold down STANDBY MEMORY
Step 3 and press – ?K or k? + repeatedly to set the
standby time.
The time changes by a minute each time – ?K or k? + is pressed.
Hold down the button to rapidly change the digits.
When
or
flash in the display.
6
Release STANDBY MEMORY
"STANDBY
up and the standby setting is complete.
The clock indication returns to the current
time.
7
Display the time of the area you want the standby
function to take effect (LOCAL time or WORLD time).
When the time is reached and the standby function activates
The radio turns on, SLEEP indicator appears and the preset
station is received. The power will automatically turn off after
about 60 minutes.
To check the standby time
Hold down STANDBY MEMORY
off. The preset standby time is displayed while the button is
pressed.
To change the standby time
Perform Step 4 and after and set the new time.
To cancel the standby function
Press STANDBY MEMORY
that STANDBY
At this time, release button
the unit goes to Step 5 for setting the standby time again.
Tips
• To temporarily cancel the standby function, turn off the radio and slide
HOLD in the direction of the arrow so that "-" is displayed. The
timer goes back to effect when "-" is cleared from the display (see
"Preventing operation errors – Hold function", page 32).
• Once the standby presets are set, the radio turns on at the preset time
everyday unless the standby function is canceled by clearing
STANDBY
or STANDBY
canceled, the station and time stored in STANDBY MEMORY
are not erased until new settings are overwritten.
• If the standby memory is in standby status, it takes effect even when
you are listening to the radio. The radio switches to the preset standby
frequency at the standby time.
• You can set both STANDBY
same time. The radio turns on at the first standby time to receive the
first standby frequency, then switches to the second standby frequency
at the second standby time.
• If both STANDBY
STANDBY
will operate.
is held down, STANDBY
" or "STANDBY
or
or STANDBY
or
. Even when the standby function is
and
and
are set to the same standby time, only
or
selected in
or STANDBY
or
.
" lights
or
with the radio turned
with the radio turned off so
is cleared from the display.
within a second. Otherwise,
to the standby status at the
Using the timer
will
or
GB
29