Air Filter System; Cleaning The Air Filter - Stihl MS 362 Manual De Instrucciones

English
Chain type Pitch
Picco 3/8" P
Rapid 1/4"
Rapid 3/8"; 0.325" 0.24"
Rapid 0.404"
If groove depth is less than specified:
N
Replace the guide bar.
The drive link tangs will otherwise
scrape along the bottom of the groove –
the cutters and tie straps will not ride on
the bar rails.
40

Air Filter System

Minimum
groove
depth
The air filter system can be adapted to
0.20"
suit different operating conditions by
(5.0 mm)
installing a choice of filters. Changing
0.16"
the filter is quick and simple.
(4.0 mm)
The saw comes standard with either a
fleece filter or a fabric filter.
(6.0 mm)
0.28"
Fleece filter with felt prefilter
(7.0 mm)
For normal, dry and very dusty work
areas.
Fabric filter
For severe winter conditions (e.g.
powder and drifting snow, frost).

Cleaning the Air Filter

If there is a noticeable loss of engine
power
Removing the shroud
N
Move the Master Control lever to the
stop position (0).
N Push the hand guard forward – the
chain is locked.
2
1
N Open the twist locks (1) by turning
them 1/4 turn counterclockwise with
the combination wrench.
N Remove the shroud (2).
Removing the air filter
N Clean away loose dirt from around
the filter.
To avoid damaging the filter, do
not use tools for removing and
installing the air filter.
1
1
MS 362