Replacing The Starter Rope And Rewind Spring - Stihl MS 362 Manual De Instrucciones

English
Warning!
To reduce the risk of fire and burn injury,
use only spark plugs authorized by
STIHL. Always press spark plug boot (1)
snugly onto spark plug terminal (2) of
the proper size. (Note: If terminal has
detachable SAE adapter nut, it must be
attached.) A loose connection between
spark plug boot and ignition wire con-
nector in the boot may create arcing that
could ignite combustible fumes and
cause a fire.
44
Installing the Spark Plug
1
N Screw home the spark plug, fit the
2
boot and press it down firmly.
N Fit the shroud.
Replacing the Starter Rope
and Rewind Spring
Removing the shroud
N Move the Master Control lever to
stop position (0)
N Push the hand guard forward – the
chain is locked.
2
1
N Open the twist locks (1) by turning
them 1/4 turn counterclockwise with
the combination wrench.
N Remove the shroud (2).
1
1
MS 362