Getting Started; Step 1: Checking Supplied Items; Step 2: Installing The Supplied M-Crew Server Ver. 2.5 Software - Sony TDM-NC1 Manual De Instrucciones

Getting Started

The setup procedure is below.
Check the Supplied Items
(STEP )
1
m
Install M-crew Server
(STEP – )
2 3
m
Make the Windows Firewall Settings
(STEP )
4
m
Make the Software Firewall Settings
(STEP )
5
m
Set up TDM-NC1
(STEP – )
6 7
m
Check the Operations
(STEP )
8
STEP 1: Checking
supplied items
Unit
Remote (RM-ANU010) with battery
TDM-NC1 Operating Instructions/M-crew Server Ver.
2.5 software CD-ROM
Quick Setup Guide
STEP 2: Installing the
supplied M-crew Server
Ver. 2.5 software
You must first install the supplied M-crew
Server Ver. 2.5 software on your computer.
For details on the installation, refer to the
"M-crew Server Ver. 2.5" Installation
Instructions contained on the supplied CD-
ROM.
Installation may take some time depending on
the environment. A progress bar is displayed
while installation is underway. Wait until the
installation is finished.
Note for NAS-CZ1/CPF-IX001 users
Install M-crew Server Ver. 2.5 without uninstalling
M-crew Server Ver. 1.0 or 2.0. The contents
information can be used even after installing M-crew
Server Ver. 2.5.
1
Turn on your computer and login as an
administrator.
Wait for Windows to load.
2
Insert the supplied CD-ROM into the
CD-ROM drive of your computer.
M-crew Server
Ver. 2.5 software
CD-ROM
GB
10