Input method/Number of the characters
for security key
WEP 64bits
Characters
5 (one-byte
alphanumerics
and/or symbols)
Hexadecimal
10 (0 to 9, A to
numbers
F, a to f)
4Enter a pre-shared key when you select
[WPA(TKIP)], [WPA(AES)], [WPA2(TKIP)],
or [WPA2(AES)] in 2.
Enter the pre-shared key for your wireless LAN
router.
The length of the key should be 8 to 64 characters.
If you input 64 characters, enter hexadecimal
numbers (0 to 9, A to F, a to f).
Input method/Number of the characters
for pre-shared key
Characters
8 to 63 (one-byte alphanumerics
and symbols)
Hexadecimal
64 (0 to 9, A to F, a to f)
numbers
5Cancel the settings.
6Click the button to confirm the set values.
If any of the set values is incorrect, a window
appears.
Click [Setup] to show the set values. Correct them if
necessary.
Notes
• Use a security key or a pre-shared key that cannot be
easily guessed.
• Periodically change the security key and the pre-
shared key to ensure the network security.
Firmware update window
WEP 128bits
Update the firmware for the unit.
13 (one-byte
alphanumerics
and/or symbols)
26 (0 to 9, A to
F, a to f)
1The version of the current firmware is
2Select the firmware file you want to update.
3Click the button to update.
Notes
• Do not restart, pull out the cable, or turn off the
• Check the following website for the unit firmware
displayed.
Click [Browse] to show the window for selecting
the firmware.
If you select the right firmware, updating starts.
Click [Restart] when the update is completed.
If you select an incorrect firmware, click [Retry]
and select the correct one.
power of the connected AV system while updating
the firmware.
updates;
USA:
http://esupport.sony.com/?ref=http%3A//
www.sony.com/index.php
Canada:
http://www.sony.ca/sonyca/view/english/warranty/
consumer_support.shtml
Europe:
http://support.sony-europe.com/main/main.asp?l=en
1
2
3
GB
38