Registering The Tdm-Nc1 On Your Computer Manually; Checking Network Settings - Sony TDM-NC1 Manual De Instrucciones

Registering the TDM-NC1
on your computer
manually
When the unit is connected to your computer
after installing the M-crew Server Ver. 2.5
software, the unit is registered automatically on
your computer.
Register the unit on your computer manually for
higher security.
1
Select "REGISTER?" in the network
menu (page 31), then press ENTER.
The count down display appears in the
display of the unit.
2
Click [Start] – [All programs] – [M-crew
Server] – [TOOLS] – [EQUIPMENT
LIST] in that order to display the screen
on the M-crew Server Ver. 2.5.
For details, see the "M-crew Server Ver.
2.5" Installation Instructions included on
the supplied CD-ROM.
3
During displaying the count down
display, set "Equipment selection
mode" to "Manual", and then click
[Add] on your computer.
The registration starts.
"Complete!" appears in the display of the
unit when the registration is completed.
Notes
• When the registration is incomplete, "Incomplete!"
appears in the display of the unit.
• Step 3 must be performed within 5 minutes after
performing step 1.
Checking network
settings
1
Select "NET INFO?" in the network
menu (page 31), then press ENTER.
2
Press . or > repeatedly to select
the item that you want to check, then
press ENTER.
Each time you press ENTER, the display
changes cyclically as follows:
NET TYPE? t AUTO* t
IP ADDRESS? t IP address* t
SUBNET MASK? t Subnet mask* t
GATEWAY? t Default Gateway* t
MAC ADDRESS? t MAC address t
SERVER NAME? t Connected server*
t MY NAME? t Name assigned*
* The display may differ depending on the
settings.
GB
33