Installing The Tdm-Nc1; Connection Examples - Sony TDM-NC1 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 86

Installing the TDM-NC1

Connect the DIGITAL MEDIA PORT of the unit to an AV system with DIGITAL MEDIA PORT interface (Sony
DAV series, etc.).
TDM-NC1

Connection examples

Connecting to an AV system which can output video signals when the system is
in DMPORT function
Connecting to an AV system which cannot output video signals when the
system is in DMPORT function
Connect a video cable (not supplied) to the VIDEO OUT jack of the unit. Refer to the user's guide of
your AV system for further information.
Notes
• The unit turns on/off automatically whenever the connected AV system turns on/off.
• When connecting a video cable to a TV that has a SCART (EURO AV) jack, use a commercially available
conversion connector.
• When connecting a video cable (not supplied) to the VIDEO OUT jack of the unit, no image is output from the
DIGITAL MEDIA PORT cable of the unit.
Video cable
(not supplied)
TV
AV system (Sony DAV series,
STR series, etc.)
AV system (Sony
HT series, etc.)
TV
Video cable (not supplied)
AV system with DIGITAL MEDIA
PORT interface (back panel)
DMPORT
DIGITAL MEDIA
PORT cable
TDM-NC1
DIGITAL MEDIA
PORT cable
TDM-NC1
GB
15

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido