Conventions Used In This Manual; Precautions For Placement And Use; Beware Of Condensation; Cleaning The Unit - Tascam MZ-223 Manual Del Usuario

Conventions used in this manual

In this manual, we use the following conventions:
0 The names of switches, connectors and other
physical parts of this unit are written using a bold
font like this: POWER switch.
0 Additional information is provided as necessary as
tips, notes and cautions.
TIP
These are tips about how to use the unit.
NOTE
These provide additional explanations and de-
scribe special cases.
CAUTION
Failure to follow these instructions could result
in injury, damage to equipment or lost recording
data, for example.

Precautions for placement and use

0 The operating temperature range of this unit is
5–35 °C.
0 Do not install this unit in the following types of
locations. Doing so could cause malfunction.
Places with significant vibrations
Near windows or other places exposed to di-
rect sunlight
Near heaters or other extremely hot places
Extremely cold places
Places with bad ventilation or high humidity
Very dusty locations
0 To enable good heat dissipation, do not place any-
thing on top of the unit.
0 Do not place the unit on top of a power amplifier
or other device that generates heat.

Beware of condensation

If the unit is moved from a cold to a warm place, or
used after a sudden temperature change, there is a
danger of condensation; vapor in the air could con-
dense on the internal mechanism, making correct
operation impossible.
To prevent this, or if this occurs, let the unit sit for one
or two hours at the new room temperature before
using it.

Cleaning the unit

To clean the unit, wipe it gently with a soft dry cloth.
Do not wipe with chemical cleaning cloths, benzene,
thinner, alcohol or other chemical agents. Doing so
could damage the surface or cause discoloration.

User registration

Customers in the USA, please visit the TASCAM web-
site to register as a user online.
https://tascam.jp/jp/login

Using the TEAC Global Site

You can download updates for this unit from the TEAC
Global Site:
http://teac-global.com/
In the TASCAM Downloads section, select the desired
language to open the Downloads website page for
that language.

Product registration

Customers in the USA, please visit the following TAS-
CAM website to register your TASCAM product online.
http://tascam.com/
About TASCAM customer support
service
TASCAM products are supported and warrantied only
in their country/region of purchase.
To receive support after purchase, on the TASCAM
Distributors list page of the TEAC Global Site (http://
teac-global.com/), search for the local company or
representative for the region where you purchased
the product and contact that organization.
When making inquiries, the address (URL) of the shop
or web shop where it was purchased and the pur-
chase date are required.
Moreover, the warranty card and proof of purchase
might also be necessary.
7
TASCAM MZ-223