Sony Cyber-shot DSC-RX100 Manual De Instrucciones página 19

Protect
Specify Printing
(Setup)
Monitor Brightness
Volume Settings
Audio signals
Upload Settings
Mode Dial Guide
Pwr Save Start Time
Demo Mode
HDMI Settings
USB Connection
USB LUN Setting
USB Power Supply
Language
Date/Time Setup
Area Setting
Format
File Number
Select REC Folder
Protects the images.
Adds a print order mark to a still image.
Sets the monitor brightness.
Sets the volume for movie playback.
Sets the operating sound of the camera.
Sets the upload function of the camera when using an
Eye-Fi card.
Turns the mode dial guide (the explanation of each
shooting mode) on or off.
Sets the length of time until the camera turns off
automatically.
Sets demonstration playback of a movie to on or off.
Sets the HDMI settings.
Sets the USB connection method.
Enhances compatibility by limiting the functions of
the USB connection. Set to [Multi] in normal
conditions and to [Single] only when the connection
between the camera and a computer or AV
component cannot be established.
Sets whether to supply power via USB connection
when the camera is connected to a computer or USB
device using a micro USB cable.
Selects the language.
Sets date and time, and daylight savings.
Sets the location of use.
Formats the memory card.
Sets the method used to assign file numbers to still
images and movies.
Changes the selected folder for storing still images
and movies (MP4).
GB
GB
19