Nokia N97 Manual Del Usuario página 142

devices is not over 10 meters (33 feet) and that there
are no walls or other obstructions between the devices.
Q: Why can't I end a Bluetooth connection?
A: If another device is connected to your device, you
can end the connection from the other device or
deactivate Bluetooth connectivity in your device. Select
Menu Settings
>
Bluetooth > Off.
Q: Why can't I see a wireless LAN (WLAN) access
point even though I know I'm within its range?
A: The WLAN access point may use a hidden service set
identifier (SSID). You can only access networks that use
a hidden SSID if you know the correct SSID, and have
created a WLAN internet access point for the network
on your Nokia device.
Q: How do I turn the wireless LAN (WLAN) off on
my Nokia device?
A: The WLAN on your Nokia device turns off when you
are not connected or trying to connect to another
access point, or not scanning for available networks.
To further reduce battery consumption, you can specify
that your Nokia device does not scan, or scans less
often, for available networks in the background. The
WLAN turns off in between background scans.
To change the background scan settings:
1. Select Menu
>
142
and Connectivity Bluetooth
>
Settings and Wireless LAN.
2. To increase the background scan time interval,
adjust the time in Scan for networks. To stop
background scans, select
availability > Never.
3. To save your changes, select Back.
When Show Wi-Fi availability
WLAN availability icon is not shown in the home
>
screen. However, you can still manually scan for
available WLAN networks, and connect to WLAN
networks as usual.
Q: What do I do if the memory is full?
A: Delete items from the memory. If
memory to perform operation. Delete some data
first. or Memory low. Delete some data from phone
memory. is displayed when you are deleting several
items at the same time, delete items one by one,
beginning with the smallest items.
Q: Why can't I select a contact for my message?
A: The contact card does not have a phone number,
address, or e-mail address. Select
and the relevant contact, and edit the contact card.
Q: How can I end the data connection when the
device starts a data connection again and
again?
A: The device may be trying to retrieve a multimedia
message from the multimedia message center. To stop
the device from making a data connection, select
Show Wi-Fi
is set to Never, the
Not enough
Menu Contacts
>