Operation; Husqvarna Connect - Husqvarna 550iBTX Manual Del Usuario

11. Connect the blow pipe (M) to the intermediate pipe
(L). Make sure that the knob (N) on the intermediate
pipe points up and goes into the guide track of the
blow pipe.
12. Turn the blow pipe fully to lock the intermediate pipe
and the blow pipe.
13. Attach the sleeve around the flexible tube and the
cable as shown in the illustration. Close the zipper.
To adjust the harness
A correctly adjusted harness and product makes
operation easier. Adjust the harness to give the best
operation position.
1. Put on the harness of the product.
A
B
C
Introduction
WARNING:
understand the safety chapter before you
use the product.

Husqvarna Connect

Husqvarna Connect is a free app for your mobile device.
The Husqvarna Connect app gives extended functions
for your Husqvarna product.
• Extended product information.
10
2. Connect the hip strap with the clip (C). Tighten the
strap until the weight of the product is on your hips.
3. Tighten the side straps (B) until the product is tight
against your body.
4. Connect the chest strap to the clip (A).
5. Tighten the strap.
To put the product in transportation
mode
1. Turn the blower tube counterclockwise until it points
up.
2. Connect the transport clip.

Operation

• Information about, and help with, product parts and
servicing.
Bluetooth
Read and
Products with built-in Bluetooth
can connect to mobile devices and enables additional
functions.
The symbol for Bluetooth
when your mobile device is connected to the product.
To start to use Husqvarna Connect
1. Download the Husqvarna Connect app on your
mobile device.
2. Register in the Husqvarna Connect app.
®
wireless technology
®
wireless technology
®
wireless technology shows up
790 - 006 - 13.03.2020