Safety Instructions For Maintenance - Husqvarna 550iBTX Manual Del Usuario

servicing dealer, ask him for the address of your
nearest service agent.
To do a check of the user interface
1. Push and hold the start/stop button (A).
B
a) The product is on, when the LED (B) is on.
b) The product is off, when the LED (B) is off.
Troubleshooting on page 13 if the warning
2. Refer to
indicator (C) is on or flashes.
To do a check of the power trigger
• Push and release the power trigger to make sure
that it moves freely.
Harness safety
WARNING:
following warning before you operate the
product.
The harness must always be worn when working with
the product. Failure to do so means you will be unable to
operate safely and this can result in injury to yourself or
others. Make sure that the waist belt and chest belt are
buttoned and correctly adjusted. There is a risk that an
unclosed belt can get stuck or sucked into the fan of the
product.
8
C
A
To use the quick release function
If an emergency occurs, remove the backpack blower
quickly.
1. Push the clips and remove the straps.
2. Remove the harness.

Safety instructions for maintenance

• Remove the battery before you do maintenance,
other checks or assemble the product.
Read the
• The operator must only do the maintenance and
servicing shown in this operator's manual. Speak to
your servicing dealer for maintenance and servicing
of a larger extension.
• Keep all nuts, bolts and screws tight to be sure the
product is in safe working condition.
• Replace worn or damaged parts.
• If you do not do maintenance, it decreases the life
cycle of the product and increases the risk of
accidents.
• Special training is necessary for all servicing and
repair work, especially for the safety devices on the
product. If not all checks in this operator's manual
are approved after maintenance, speak to your
servicing dealer. We guarantee that there are
WARNING:
warning instructions that follow before you
do maintenance on the product.
790 - 006 - 13.03.2020
Read the