Troubleshooting - Husqvarna T535i XP Manual Del Usuario

7. Turn the guide bar daily to extend its life cycle.
Keypad
Possible fault codes on the keypad of the product.
LED display
Warning indicator flashing.
Green activate LED flashing.
Warning indicator lit.
Battery
Problem
Green LED flashes.
Red error LED flashes.
Red error LED comes on.
959 - 007 -

Troubleshooting

Possible faults
Chain brake engaged.
Temperature deviation.
Overload. Cutting attachment jam-
med.
The power trigger and the activate
button are pressed at the same time.
Low battery voltage.
Service.
Possible faults
Low battery voltage.
The battery is empty.
Temperature deviation.
Overvoltage.
Cell difference is to much (1V).
Possible action
Pull back the front hand guard to re-
lease the chain brake.
Allow the product to cool down.
The cutting attachment is jammed.
Release the cutting attachment.
Release the power trigger and the
product is active.
Charge the battery.
Turn to your servicing dealer.
Possible solution
Charge the battery.
Charge the battery.
Use the battery in temperatures between
-10°C (14°F) and 40°C (104°F).
Remove the battery from the battery charger.
Speak to your servicing dealer.
25