Panasonic EY3640 Manual De Instrucciones página 14

LAMP INDICATIONS
EN
(Green)
Turn off
VIII.
MAINTENANCE
• Use only a dry, soft cloth for wiping the unit.
Do not use a damp cloth, thinner, benzine, or other volatile solvents for cleaning.
• In the event that the inside of the tool or battery pack is exposed to water, drain and allow to
dry as soon as possible. Carefully remove any dust or iron fi lings that collect inside the tool. If
you experience any problems operating the tool, consult with a repair shop.
Charging is completed. (Full charge.)
Battery is approximately 80% charged.
Now charging.
Charger is plugged into the AC outlet. Ready to charge.
Charging Status Lamp.
(Orange)
Left: green Right: orange will be displayed.
Battery pack is cool.
The battery pack is being charged slowly to reduce the load
on the battery.
Battery pack is warm.
Charging will begin when temperature of battery pack drops.
If the temperature of the battery pack is -10 °C or less, the
charging status lamp (orange) will also start fl ashing. Charging
will begin when the temperature of the battery pack goes up.
Charging is not possible. Clogged with dust or malfunction of
the battery pack.
Illuminated
- 14 -
Flashing