Setting The Pin Code; Pairing Bluetooth ® Adapter And Bluetooth Wireless Technology Device; Listening To Music Contents Of Bluetooth Wireless Tech - Pioneer X-SMC3-K Manual De Instrucciones

®
Bluetooth
Audio playback (optional)
2 Press STANDBY/ON to turn the power on.
Press FUNCTION / or BT AUDIO on the
3
top panel of the unit to select BT AUDIO as the
1
input source.
The BT AUDIO indicator lights and BT Audio is shown on the
main display.

Setting the PIN code

Set this unit's PIN code to the same setting as that for the
Bluetooth wireless technology device used. Supported PIN
code setting values include 0000, 1234 or 8888.
• Default setting: 0000
Press FUNCTION / or BT AUDIO on the
1
top panel of the unit to select BT Audio as the
input source.
The BT AUDIO indicator lights and BT Audio is shown on the
main display.
2 Press SET UP.
Use / to select Option Settings
3
Select, then press ENTER.
Option Setting
BT PIN Select
Volume Limit Setting
Internet Parental Lock
AutoMode Change
Use / to select the PIN code, then press
4
ENTER.
The PIN code is stored.
Note
®
1 When the Bluetooth adapter is not connected and BT Audio is selected as the input source, the error message BT Adapter Not
Connected will be shown on the main display.
2 • Pairing is required when you first use Bluetooth wireless technology device and Bluetooth
• To enable Bluetooth communication, pairing should be done with both of your system and Bluetooth wireless technology device.
Pairing Bluetooth
Bluetooth wireless technology device
"Pairing" must be done before you start playback of Bluetooth
wireless technology content using Bluetooth
sure to pair devices the first time you operate the system or
any time pairing data is cleared. "Pairing" is the step
necessary to register Bluetooth wireless technology device to
enable Bluetooth communications.
also the operating instructions of your Bluetooth wireless
technology device.
Press FUNCTION / or BT AUDIO on the
1
top panel of the unit to select BT Audio as the
input source.
The BT AUDIO indicator lights and BT Audio is shown on the
main display.
2 Turn on the Bluetooth wireless technology
device that you want to pair, place it near the
system and set it into pairing mode.
Pairing starts.

BT PIN
3 Check to see that the Bluetooth
detected by the Bluetooth wireless technology
device.
• If the Bluetooth wireless technology device cannot be
connected to the unit, perform the connection operation
from the Bluetooth wireless technology device.
Listening to music contents of Bluetooth
wireless technology device
Press FUNCTION / or BT AUDIO on the
1
top panel of the unit to select BT Audio as the
input source.
The BT AUDIO indicator lights and BT Audio is shown on the
main display.
2 Make connection between the Bluetooth
wireless technology device and the unit.
• See Pairing Bluetooth® adapter and Bluetooth wireless
technology device above.
®
adapter and
®
adapter. Make
2
For more details, see
®
adapter is
®
adapter.
06
19
En