To Prepare Your Product For Long-Term Storage; Technical Data; Accessories; Recommended Cutting Equipment - Husqvarna T525 Manual Del Usuario

To prepare your product for long-term
storage
1. Disassemble and clean the saw chain and the
groove in the guide bar.
CAUTION: If the saw chain and guide
bar are not cleaned, they can become
rigid or blocked.

Technical data

Engine
Cylinder displacement, cm
Idle speed, rpm
Maximum engine power acc. to ISO 8893, kW/hp @ rpm
1
Ignition system
Spark plug
Electrode gap, in
Fuel and lubrication system
Fuel tank capacity, US Pint/cm
Oil tank capacity, US Pint/cm
Type of oil pump
Weight
Weight, kg/lb
Saw chain/guide bar
Type of drive sprocket/number of teeth
Saw chain speed at 133% of maximum engine power
speed, m/s / ft/s.

Recommended cutting equipment

A specific chainsaw model has to be evaluated with the
cutting equipment to be recommended and fulfill the
requirements in ANSI B175.1-2012 (Internal Combustion
1
Always use the recommended spark plug type. Use of the incorrect spark plug type can cause damage to the
piston/cylinder.
732 - 017 - 11.10.2019
Technical data
3
3
3

Accessories

2. Attach the transportation guard.
3. Clean the product. Refer to
for instructions.
4. Do a complete servicing of the product.
Husqvarna T525
27.0
2900
1.1/1.5@9500
NGK CMR6A
0.030
0.40/190
0.36/170
Adjustable
2.7/6.0
3/8"/Spur 6
24.1/79.0
Engine-Powered Hand-Held Chainsaws - Safety and
Environmental Requirements) and Canadian Standards
CSA Z62.1-15 (Chainsaws) and CSA Z62.3-11 (R2016)
(Chainsaw kickback).
Maintenance on page 17
29