Accessories; Guide Bar And Saw Chain Combinations; Filing Equipment And Filing Angles; Approved Batteries - Husqvarna 120i Manual De Usuario

2
Sound levels
Equivalent sound pressure level at the operator's ear, dB(A)
3
Vibration levels
Saw chain/guide bar
Recommended bar lengths, inch/cm
Usable cutting length, inch/cm
Type of drive sprocket/number of teeth
Maximum chain speed / (savE), m/s

Guide bar and saw chain combinations

The following cutting attachments are approved for
Husqvarna 120i.
Guide bar
Length, in Chain pitch, in
12 3/8

Filing equipment and filing angles

Using Husqvarna file gauge will give you the correct
filing angles. We recommend you to always use a
Husqvarna file gauge to restore the sharpness of the
11/64 in/4,5
38
mm

Approved batteries

Only use Husqvarna original BLi batteries for this
product.
2
Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for
different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent
sound pressure level is a standard deviation of 2,5 dB (A).
3
Declared vibration level is for the handle with highest figures. Typical statistical dispersion for vibration level is
1,5 m/s.
26

Accessories

Gauge, mm
1,1
75° 30°
Saw chain
Max. nose radius Type
7T Husqvarna H38
saw chain. The part numbers are given in the table
below.
If you do not know which saw chain you have on your
product, turn to your servicing dealer.
0.025 in/
0°
0,65 mm
120i
88
3,8
12/30
10/26
Spur/6
11,5 (10)
Length, drive
links (no.)
45
5056981-03 5795588-01
1259 - 001 - 11.07.2019