Accessories - Husqvarna 390 XP Manual Del Usuario

Saw chain speed at 133% of maxi-
mum engine power speed, ft/s / m/s.
Recommended cutting equipment
A specific chainsaw model has to be evaluated with the
cutting equipment to be recommended and fulfill the
requirements in ANSI B175.1-2012 (Internal Combustion
Engine-Powered Hand-Held Chainsaws - Safety and
Environmental Requirements) and Canadian Standards
CSA Z62.1-15 (Chainsaws) and CSA Z62.3-11 (R2016)
(Chainsaw kickback).
Chainsaw models Husqvarna 390 XP, 390 XPG met the
safety requirements in ANSI B175.1-2012 and Canadian
Standards Association CSA Z62.1-15 (Chainsaws) and
CSA Z62.3-11 (R2016) (Chainsaw kickback), when
equipped with the below listed saw chain and guide bar
combination(s).
Guide bar
Length, in/cm Pitch, in
18/46 3/8
20/50
24/61
28/71
18/46 3/8
20/50
24/61
28/71
18/46 3/8
20/50
24/61
28/71
Pixel
Pixel is a guide bar and saw chain combination that is
more light weight and designated to offer more energy
efficient use by cutting narrow cuts. Both guide bar and
590 - 001 - 13.01.2020
Husqvarna 390 XP
93.5/28.5

Accessories

Note: Other chainsaw models may not meet the
kickback requirements when equipped with the listed
guide bar and saw chain combinations.
We recommend only to use the listed guide bar and saw
chain combinations.
Kickback and guide bar nose radius
For sprocket nose bars the nose radius is specified by
the number of teeth, such as 10T. For solid guide bars
the nose radius is specified by the dimension of the
nose radius. For a given guide bar length, you can use a
guide bar with smaller nose radius than given.
Gauge, in/mm Max. nose radius
0.058/1.5 11T
0.058/1.5 11T
0.050/1.3 11T
saw chain need to be Pixel to get these benefits. Pixel
cutting equipment is marked with this symbol.
Husqvarna 390 XPG
93.5/28.5
Saw chain
Type Length, drive
links (no.)
Husqvarna H42 68
72
Husqvarna H48
84
Husqvarna H81
92
Husqvarna C85 68
72
84
93
Husqvarna C83 68
72
84
93
35