Disposal; Manufacturer's Warranty - Tools - Hilti C7/24 Manual De Instrucciones

Ocultar thumbs Ver también para C7/24:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 52
In the event of battery capacity dropping below an
acceptable level after a long period of use, we rec-
ommend that the battery is returned to Hilti for a diag-
nostic check.

9. Disposal

en
-CAUTION-
The following may occur if the equipment is disposed of incorrectly:
Toxic fumes, which may present a health hazard, are released when plastic parts are burned.
Batteries may leak when damaged or heated significantly, resulting in poisoning, burns, acid burns or envi-
ronmental pollution.
Incorrect disposal may permit unauthorized persons to use the equipment in ways other than as directed. In
doing so, they may injure themselves or third parties, or cause environmental pollution.
Most of the materials from which Hilti appliances are manufactured can be recycled. The materials must be cor-
rectly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking
back your old appliances for recycling. Please ask your Hilti customer service department or Hilti sales repre-
sentative for further information.
Dispose of batteries in accordance with national regulations or return them
t o Hilti for disposal.
Only for EU countries
Do not dispose of electric tools together with household waste material!
In observance of European Directive on waste electrical and electronic equipment and its implemen-
tation in accordance with national law, electric tools that have reached the end of their life must be
collected separately and returned to an environmentally compatible recycling facility.
10. Manufacturer's warranty – tools
Hilti warrants that the tool supplied is free of defects
in material and workmanship. This warranty is valid so
long as the tool is operated and handled correctly,
cleaned and serviced properly and in accordance with
the Hilti Operating Instructions, and the technical sys-
tem is maintained. This means that only original Hilti
consumables, components and spare parts may be
used in the tool.
This warranty provides the free-of-charge repair or
replacement of defective parts only over the entire lifes-
pan of the tool. Parts requiring repair or replacement
as a result of normal wear and tear are not covered by
this warranty.
Additional claims are excluded, unless stringent
national rules prohibit such exclusion. In particular,
14
Printed: 08.07.2013 | Doc-Nr: PUB / 5069450 / 000 / 01
Hilti is not obligated for direct, indirect, incidental
or consequential damages, losses or expenses in
connection with, or by reason of, the use of, or inabil-
ity to use the tool for any purpose. Implied warranties
of merchantability or fitness for a particular purpose
are specifically excluded.
For repair or replacement, send tool or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
This constitutes Hilti's entire obligation with regard to
warranty and supersedes all prior or contemporane-
ous comments and oral or written agreements con-
cerning warranties.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

C7/36-acs

Tabla de contenido