Description; Accessories; Technical Data - Hilti C7/24 Manual De Instrucciones

2. Description

The charger is designed for charging Hilti batteries with
a nominal voltage of 7.2 – 36 volts (C 7/36-ACS charg-
er) or 7.2 – 24 volts (C 7/24 charger).
en
Voltage Designation Battery type
9.6 V SFB 105
9.6 V SBP 10
9.6 V RB 10
12 V SFB 125
12 V SBP 12
12 V SFB 121
12 V SFB 126
12 V BP 12
15.6 V SFB 150
15.6 V SFB 155
18 V SFB 180
18 V SFB 185
24 V B24/2.0
24 V B24/2.4
24 V B24/3.0
24 V BP 40,
BP 72
36 V BP 6-86
36 V B 36 /2.4

3. Accessories

CA 7/36 adaptor for BP 12, BP 40, BP 72 and RB 10

4. Technical data

Charger
Refresh function
Cooling
Mains voltage
Mains frequency
Battery types
Output voltage
Output power
Charging times
Weight
Supply cord length
Dimensions (L×B×H)
Charging control
Protection class
Right of technical changes reserved
10
Printed: 08.07.2013 | Doc-Nr: PUB / 5069450 / 000 / 01
Charging time
with C7/24
NiMH 45 min.
NiCd 30 min.
NiCd 20 min.
NiMH 45 min.
NiCd 30 min.
NiCd 30 min.
NiMH 45 min.
NiCd 20 min.
NiCd 30 min.
NiMH 45 min.
NiCd 34 min.
NiMH 51 min.
NiCd 48 min.
NiCd 48 min.
NiMH 72 min.
NiCd 41–72 min.
NiCd –
NiCd –
C 7/24
Manual refresh function
("Refresh" button)*
By convection
100–127 V and 220–240 V
50/60 Hz
NiCd, NiMH
7.2 – 24 V
90 W
See table in section 2.
Approx. 1.0 kg
Approx. 2 m
170×165×88 mm
Electronic charging control (microcontroller)
Electrical protection class II (double insulated) Z
* See section 7.3 for further information.
Items supplied
– C 7/24 standard charger
or
– C 7/36-ACS top charger
– Operating instructions
Charging time Examples of tools
with C7/36-ACS using this battery
30 min. SF 100-A, SB 10, HIT-BD 2000
20 min. SF 100-A, SB 10, HIT-BD 2000
15 min. FS 10 Ferroscan (with adaptor)
30 min. SF 120-A, SB 12
20 min. SF 120-A, SB 12
20 min. SF 121-A
30 min. SF 121-A
15 min. TCI 12 (with adaptor)
20 min. SF 150-A
45 min. SF 150-A
20 min. SF 4000-A, SF 180-A
45 min. SF 4000-A, SF 180-A
20 min. UH 240-A, TE 2-A, WSR 650-A
24 min. UH 240-A, TE 2-A, WSR 650 A
30 min. UH 240-A, TE 2-A, WSR 650-A
20–36 min. TE 5-A (with adaptor)
34 min. TE 6-A (only C 7/36-ACS!)
34 min. TE 6-A (only C 7/36-ACS!)
C 7/36-ACS
Automatic refresh function
("Refresh" function)*
Active cooling system
100–127 V and 220–240 V
50/60 Hz
NiCd, NiMH
7.2 – 36 V
200 W
approx. 1.0 kg
approx. 2 m
170×165×88 mm