Disposal; Manufacturer's Warranty - Tools - Hilti C 7/24 Manual De Instrucciones

9. Disposal

-CAUTION-
The following may occur if the equipment is disposed of incorrectly:
Toxic fumes, which may present a health hazard, are released when plastic parts are burned.
G
Batteries may leak when damaged or heated significantly, resulting in poisoning, burns, acid burns or envi-
G
en
ronmental pollution.
Incorrect disposal may permit unauthorized persons to use the equipment in ways other than as directed. In
G
doing so, they may injure themselves or third parties, or cause environmental pollution.
Most of the materials from which Hilti appliances are manufactured can be recycled. The materials must be cor-
rectly separated before they can be recycled. In many countries, Hilti has already made arrangements for taking
back your old appliances for recycling. Please ask your Hilti customer service department or Hilti sales repre-
sentative for further information. Should you wish to return the appliance yourself to a disposal facility for recy-
cling, proceed as follows: Dismantle the appliance as far as possible without the need for special tools.
Separate the individual parts as follows:
Parts / assembly
Outer housing
Electronics
Supply cord
Battery
Battery
Screws, small parts
* Dispose of batteries in accordance with national regulations or return them
t o Hilti for disposal.
Disposal
Batteries
Hilti batteries contain nickel, cadmium and nickel-metal hydrid.
Disposal of batteries in accordance with national regulations or return used batteries to
Hilti for disposal.
10. Manufacturer's warranty – tools
Hilti warrants that the tool supplied is free of defects
in material and workmanship. This warranty is valid so
long as the tool is operated and handled correctly,
cleaned and serviced properly and in accordance with
the Hilti Operating Instructions, and the technical sys-
tem is maintained. This means that only original Hilti
consumables, components and spare parts may be
used in the tool.
This warranty provides the free-of-charge repair or
replacement of defective parts only over the entire lifes-
pan of the tool. Parts requiring repair or replacement
as a result of normal wear and tear are not covered by
this warranty.
6
Printed: 07.07.2013 | Doc-Nr: PUB / 5069451 / 000 / 00
Main material
Plastic / synthetic rubber
Various
Copper, synth. rubber sheathed Scrap metal
Nickel metal-hydride
Nickel-cadmium
Steel
Recycling
Plastics recycling
Electronics scrap
*
*
Scrap metal
Additional claims are excluded, unless stringent
national rules prohibit such exclusion. In particular,
Hilti is not obligated for direct, indirect, incidental
or consequential damages, losses or expenses in
connection with, or by reason of, the use of, or inabil-
ity to use the tool for any purpose. Implied warranties
of merchantability or fitness for a particular purpose
are specifically excluded.
For repair or replacement, send tool or related parts
immediately upon discovery of the defect to the address
of the local Hilti marketing organization provided.
This constitutes Hilti's entire obligation with regard to
warranty and supersedes all prior or contemporane-
ous comments and oral or written agreements con-
cerning warranties.