Setup 3: Connect The Audio Cord; Setup 4: Connect The Amplifier Speakers Or Other Audio Equipment; Setup 5: Connect The Power Cord - Sony SDM-H246W Manual De Instrucciones

Connect a computer equipped with an HD15
output connector (analog RGB)
Using the supplied HD15-HD15 video signal cable (analog RGB),
connect the computer to the monitor's HD15 input connector (analog
RGB).
When connecting a Macintosh computer, use an adapter (not supplied),
if necessary. Connect the adapter to the computer before connecting the
video signal cable.
to the computer's
HD15 output connector
(analog RGB)

Setup 3: Connect the audio cord

Connect the monitor's audio input jack and audio
output jack of the computer or other audio equipment
using the supplied audio cord.
to audio output of the computer
or other audio equipment
to the HD15 input
connector
(analog RGB)
HD15-HD15 video signal cable
(analog RGB) (supplied)
to the audio input
audio cord (supplied)
Setup 4: Connect the amplifier
speakers or other audio
equipment
Connect the audio cable (not supplied) securely to the
monitor's audio output jack.
Audio output will be changed when the monitor's audio input and audio
output connection has been completed.

Setup 5: Connect the power cord

1 Connect the supplied power cord securely to the
monitor's AC IN connector.
2 Connect the other end securely to a power outlet.
2
to power outlet
power cord (supplied)
3 Replace the back cover.
9
(GB)
to the audio output
audio cable (not supplied)
1
to AC IN