Selecting The Menu Language - Sony VPL-FH36 Manual De Referencia

Selecting the Menu Language

The factory setting for the language for displaying menus, messages, etc. is English.
To change the on-screen language, proceed as follows:
1
Plug the AC power cord into a wall
outlet.
2
Turn on the projector.
Press the ? / 1 key on the main unit or the
? key on the Remote Commander.
3
Press the MENU key to display the
menu.
If the display cannot be properly seen,
adjust the focus, size, and position of the
projected image (page 13).
4
Select the menu language.
Press the V or v key to select the
1
Operation (
the ENTER key.
Press the V or v key to select
2
"Language (
ENTER key.
) menu then press
)" then press the
MENU
1
Operation
Language
Menu Position
Status
IR Receiver
ID Mode
Security Lock
Panel Key Lock
Sel Set
Press the V/v/B/b key to select a
3
language, then press the ENTER
key.
5
Press the MENU key to turn off the
menu screen.
Selecting the Menu Language
2
3
EnglishReset
Bottom Left
On
Front & Rear
All
Off
Off
Back
11
GB