Use & Operation - Honeywell MO Serie Manual Del Propietário

USE & OPERATION
CONTROL PANEL
1) Timer Control
2) Fan Speed Control
3) Timer / Temperature Set Controls
FUNCTION BUTTONS
POWER CONTROL
The Power Control turns the unit on and off. When the unit is plugged in, this button lights up indicating it
is in a Standby Mode ready to be switched on anytime.
TIMER CONTROL
While the unit is turned on, press the timer button then press the + or - to select the number of hours
you would like the unit to continue to run. The unit will turn off automatically.
AUTO TURN OFF:
While unit is running, press
press the + or - button to select the number of hours you want the unit to turn OFF automatically.
AUTO TURN ON:
When unit is in a standby mode (plugged in with power light on), then press the + or - button to select
the number of hours until you want the unit to automatically start running.
(6) (7) (4)
(5) (1)
4) Mode Control
5) Power Control / Standby Mode
6) Warning Light (when flashing)
the button and the display will flash. While the display is flashing,
EN
(2) (3) (8)
7
7) Timer Light
8) Filter Alert