Yamaha RX-V663 Manual De Instrucciones página 96

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Using multi-zone configuration
Operate the following operations after activating the Zone 2
operation mode.
Operating Zone 2
Rotate the R INPUT selector to select the
desired input source while the ZONE2 indicator
is flashing in the front panel display.
• Select "TUNER" as the input source to use the TUNER
features in Zone 2. For details about the TUNER
operations, see "FM/AM tuning" on page 53.
• Select "V-AUX" as the input source to use iPod
features or Bluetooth features in Zone 2. For details
about the iPod operations, see "Using iPod™" on
page 57 or "Using Bluetooth™ components" on
page 59.
Set Zone 2 to the standby mode
Press H ZONE 2 ON/OFF to set Zone 2 to the
standby mode.
y
Press L SYSTEM OFF to set the main zone and Zone 2 to the
standby mode simultaneously.
■ Setting the remote control to the Zone 2
mode
The remote control is originally set to the main mode to
control the main zone. To control Zone 2 with the remote
control, you must first set the remote control to the Zone 2
mode.
Press 2 CODE SET using a ballpoint pen or
1
a similar object.
The B TRANSMIT indicator on the remote control
flashes twice.
CODE SET
TRANSMIT
POWER
POWER
STANDBY
POWER
TV
AV
94
En
2
■ Controlling Zone 2 with the remote
Turning on Zone 2
Press and hold D POWER or C STANDBY and
then press 4
Zone 2 mode.
• Press D POWER when the main zone is turned on.
• Press C STANDBY when the main zone is turned off.
The B TRANSMIT indicator on the remote control lights
up while the remote control is set to the Zone 2 mode.
• When the remote control is set to the Zone 2 mode,
• The remote control automatically exits from the Zone 2 mode in
TRANSMIT
Flashes
Activating the Zone 2 operation mode
Press D POWER to turn on Zone 2.
Operating Zone 2
Press one of the input selector buttons ( 4 ) to
select the desired input source of Zone 2.
Setting Zone 2 to the standby mode
Press C STANDBY to set Zone 2 to the standby
mode.
Press the numeric buttons ( 6 ) to enter the
code number "9992".
PROG
ENHANCER
SUR. DECODE
1
2
3
STRAIGHT
PURE DIRECT
PARAMETER
5
6
7
MULTI CH IN
AUDIO SEL
9
0
control
to set the remote control to the
While holding
POWER
down
or
STANDBY
Notes
D POWER, C STANDBY, E VOLUME +/–, G MUTE, and
the input selector buttons ( 4 ) are set to control Zone 2.
However, the rest of the remote control buttons remain in the
main mode.
the following cases:
– when you do not make any operations within 10 seconds after
the remote control is set to the Zone 2 mode.
– when you press a remote control button other than
D POWER, C STANDBY, E VOLUME +/–, G MUTE, the
A SCENE buttons and the input selector buttons ( 4 ).
4
TRANSMIT
8
Flashes
TRANSMIT
PHONO
Lights up

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido