Sound Menu - Yamaha RX-V663 Manual De Instrucciones

Customizing this unit (MANUAL SETUP)

3 SOUND MENU

Use this feature to adjust the audio parameters.
3 SOUND MENU
.
A)EQUALIZER
B)LFE LEVEL
C)DYNAMIC RANGE
D)LIPSYNC
E)EXTD SUR.
[ ]/[ ]:
[ENTER]:
■ Equalizer
A)EQUALIZER
Use this feature to select the parametric equalizer or the
graphic equalizer.
Equalizer type select EQ TYPE SELECT
Use this feature to select the type of equalizer.
A)EQUALIZER
EQ TYPE SELECT
AUTO PEQ >GEQ OFF
[NATURAL]
[p]/[[]:
[ENTER]:
Choice
AUTO PEQ Uses the parametric equalizer adjusted in
"AUTO SETUP" (see page 33).
GEQ Adjusts the built-in 7-frequency band graphic
equalizer so that the tonal quality of the speakers
matches. Press 8 ENTER to display the graphic
equalizer screen.
OFF
Deactivates the equalizing feature.
y
Currently applied parametric equalizer type (see page 33) appears
under "AUTO PEQ".
Note
You can select "AUTO PEQ" only when you carry out "AUTO
SETUP" in advance (see page 32). In this case, "AUTO PEQ" is
automatically selected as the default setting.
78
En
Up/Down
Enter
Select
Enter
Functions
Graphic equalizer GEQ
Use this feature to match the tonal quality of the center,
surround L/R and surround back L/R, and surround back
speakers with that of the front L/R speakers. You can
adjust 7 frequency bands (63 Hz, 160 Hz, 400 Hz, 1 kHz,
2.5 kHz, 6.3 kHz, 16 kHz).
Control range: –6.0 dB to +6.0 dB
Control step: 0.5 dB
A)EQUALIZER 1/2
TEST >OFF ON
. CHANNEL;;;;FRONT L
63Hz 0dB
160Hz 0dB
400Hz 0dB
1kHz 0dB
Up/Down
[ ]/[ ]:
Select
[p]/[[]:
y
Press 8 k / n to select a frequency band and 8 l / h to adjust
the selected frequency band.
Note
The "GEQ" parameter can be adjusted only when "GEQ" is
selected in "EQ TYPE SELECT".
Test tone TEST
Use this feature to make adjustments of "GEQ" while
listening to a test tone. To select "TEST", press
repeatedly in the graphic equalizer screen.
A)EQUALIZER
.
TEST
CHANNEL;;;;FRONT L
63Hz
160Hz
400Hz
1kHz
[ ]/[ ]:
[p]/[[]:
Choice
OFF Does not output test tones and output the
currently selected source component.
ON Outputs test tones from the selected speakers.
A)EQUALIZER 2/2
TEST >OFF ON
CHANNEL;;;;FRONT L
.
2.5kHz 0dB
6.3kHz 0dB
16kHz 0dB
Up/Down
[ ]/[ ]:
Adjust
[p]/[[]:
k / n
8
1/2
>OFF ON
0dB
0dB
0dB
0dB
Up/Down
Select
Functions