Projecting; Connecting The Projector; Connecting With A Computer - Sony VPL-PX41 Manual De Referencia

Projecting

Connecting the Projector

When you connect the projector, make sure to:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly. When pulling out a cable, be sure to pull it out from the
plug, not the cable itself.
Refer also to the instruction manual of the equipment to be connected.

Connecting with a computer

video input
HD D-sub 15 pin cable
(supplied)
audio input
stereo audio connecting cable
(stereo minijack, not supplied)
Use a no-resistance cable.
CONTROL REMOTE CONTROL S VID
NETWORK
RS-232C IN S VID
(PLUG IN POWER)
INPUT A INPU
RGB AUDIO
INPUT D
R/R-Y/Pn G/Y B/B-Y/Ps SYNC/HD VD
Projecting
5
GB