Projecting A Selected File When The Power Is Turned On - Startup - Sony VPL-CX5 Manual De Instrucciones

Projecting a Selected File When the
Power is Turned on — Startup
When the power is turned on, the selected picture file is projected for about
one minute.
When you want to use the registered picture file as the startup file, you must register a
picture file as the startup file in the index screen (see page 22.)
1
Select "Option" in the MS Home, then press the ENTER key.
2
Select "Setting", then press the , or ENTER key.
3
Select "Startup", then press the ENTER key.
Select
Picture Viewer
Slide Show
Option
Select Contents
4
Select the item, then press the ENTER key.
Original: select the original picture memorized in the projector
Custom: select the picture file registered in the index screen which is saved
Off: when you do not want to set the startup
Notes
• When you want to clear the startup screen while displaying it, press the
m/</, or ENTER key.
• When you want to use the registered file with the custom setting, insert the
Memory Stick where the registered file is saved in the projector, then
turn on the power.
• You can register one startup file per one
26
GB
Projecting a Selected File When the Power is Turned on — Startup
MS Home
File Autorun
On
Setting
Memory Stick
Startup
Original
Original
Custom
Off
Close
No.: 1/1234
Size: 1024x768
The original picture cannot be changed.
in the Memory Stick
File: SPJP0001.JPG
Date: 7/15/2002 12:34
Memory Stick.
M/