Step 3 Projecting - Sony VPL-FHZ75 Manual De Referencia Rápida

Step 3
Projecting an Image
The size of a projected image depends on the distance between the projector and screen. Install
the projector so that the projected image fits the screen size.
Input select window
1
Plug the AC power cord into a wall
outlet.
2
Connect all equipment to the projector
(page 21).
3
Turn on the projector.
Press the ?/1 key on the main unit or the
? key on the Remote Commander.
4
Turn on the connected equipment.
5
Select the input source.
Press the INPUT key on the projector to
display the input select window. Press
the INPUT key repeatedly or the V/v
key to select an image to be projected.
The signal icon
side in the input select window when a
signal is input.
Projecting
5
Wall outlet
Projector
3 5
appears on the right
4
1
2
Video equipment
You can select the input source using
Direct input select keys on the Remote
Commander.
6
Switch your computer to output to
external display by changing your
computer's setting.
How to switch the computer to output to
the projector varies, depending on the
type of computer.
(Example)
+
7
Adjust the focus, size, and position of
the projected image.
6
Computer
23
GB