Step 3 Projecting - Sony VPL-DX270 Manual De Referencia Rápida

Step 3
Projecting an Image
The size of a projected image depends on the distance between the projector and screen. Install
the projector so that the projected image fits the screen size. For details on projection distances
and projected image sizes, see
Projector
1
Plug the AC power cord into the wall
outlet.
2
Connect all equipment to the
projector.
3
Press the ?/1 key to turn on the unit.
4
Turn on the connected equipment.
5
Select the input source.
Press the INPUT key on the projector to
display the menu for switching input
signal on the screen. Press the INPUT
16
GB
Projecting
Projecting
"Projection Distance
Input
Video
Input-A
Input-B
Input-C
Sel
1
Wall outlet
"
.
3
4
2
Video equipment
Computer
key repeatedly, or press the
select an image to be projected.
6
When projecting a computer image,
switch your computer's output to
external display.
The method to switch the output varies
depending on the type of computer.
(Example)
+
7
Adjust the focus, size and position of
the projected image (page 17).
5
6
/ key to
V v