Setting Parental Lock - Pioneer DVJ-1000 Manual De Instrucciones

Setting Parental Lock

Some DVDs containing violent or other mature material are pro-
vided with a parental lock function allowing parents to limit the
disc's viewing (see the disc's jacket or label for information). By
setting the player's lock level lower than that of the disc, you can
limit what discs can be viewed on the player. For example, by
setting the player's level to 6, discs with level designation 7 or 8
cannot be viewed unless a previously recorded password is input.
¶ See P. 20 for menu instructions.
Recording a password
1. Use the four sides of the cursor button ( / / / )
to navigate to the [General] \ [Parental Lock] \
[Password]
A password must be recorded before the [Level] and [Coun-
try Code] can be selected.
Audio1 A2 Video1 V2 Language
Setup Menu Mode — Basic
Setup Navigator
Parental Lock — Password
Level
Country Code
Setup viewing restrictions
Move
2. Press the ENTER button.
The [Register Code Number] screen will appear.
Audio1 V2 Language
A2 Video1
Parental Lock: Register Code Number
Enter 4—Digit Code
+/–
Move
3. Enter a 4-digit numerical code as your new
password.
Press the cursor button's up/down sides ( / ) to increment/
decrement numbers, and use the left/right ( / ) sides to move
between digits.
4. Press the ENTER button.
The following Setup Menu will be displayed.
Audio1 V2 Language
A2 Video1
Setup Menu Mode — Basic
Setup Navigator
Parental Lock — Password Change
Level
Country Code
Setup viewing restrictions
Move
Password Change:
Select this item to change your password (code number).
Level:
Select this item to set the parental lock level.
Country Code:
Select this item to select the country code of discs.
¶ It is recommended that you make a memo of your password
number and store in a safe place.
¶ If you forget your password, return the unit to its factory de-
fault settings, and set the password again.
¶ Some discs allow parental lock to be applied at the scene
level, in which case restricted scenes will be skipped during
playback. For details, consult the Operation Instructions ac-
companying your disc.
General
Exit
SETUP
General
Return
RETURN
Exit
SETUP
General
Exit
SETUP
Change the Parental Lock level
1. Select [Level] and press the ENTER button.
The [Confirm Code Number] screen will appear.
Audio1 V2 Language
A2 Video1
Level: Confirm Code Number
Enter 4—Digit Code
+/–
Move
2. Input the previously recorded 4-digit password
(code number).
Input the four digits by pressing the cursor button's up/down
sides ( / ) to increment/decrement numbers, and the left/
right ( / ) sides to move between digits.
3. Press the ENTER button.
The parental lock level setting screen will appear. The factory
default setting is [Off].
Audio1 A2 Video1 V2 Language
Parental Lock: Level Change
Level 1 2 3 4 5 6 7
Set Parental Lock Level
Move Select
ENTER
4. Press the cursor button's left/right sides ( / ) to
select the desired level, and press the ENTER
button.
The selected parental lock level will be set.
I To play back DVDs with parental lock restrictions
When an attempt is made to play back a disc restricted with the
parental lock function, a screen may appear asking you to input
the password (code number). The disc cannot be played back if
the code number is not input correctly.
Input the code number as follows:
1 Input the 4-digits by pressing the cursor button's up/down ( /
) sides to increment/decrement numbers, and the left/right
sides ( / ) to move between digits.
2 Press the ENTER button.
To change your password
1. Select the [Password Change] and press the
ENTER button.
The [Confirm Code Number] screen will appear.
Audio1 A2 Video1 V2 Language
Parental Lock: Confirm Code Number
Enter 4—Digit Code
+/–
Move
2. Input the previously set code number.
Input the 4-digits by pressing the cursor button's up/down ( /
) sides to increment/decrement numbers, and the left/right
sides ( / ) to move between digits.
Preparations (Setup) Preparations (Setup) INDEX
General
RETURN Return
Exit
SETUP
General
8 Off
RETURN
Return
Exit
SETUP
General
RETURN Return
Exit
SETUP
<DRB1414> En
29