Yamaha AP-U70 Manual De Operaciones página 18

Ocultar thumbs Ver también para AP-U70:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 112
ADVANCED OPERATION
Adjusting DSP sound field parameters
You can adjust various parameters of the DSP sound field
programs.
The default parameters of the sound field programs provide
great sound, but it is also possible to fine-tune the
parameters to suit the acoustics of the room, individual
preferences, and program source. Parameter adjustment
is required for each selected sound field program.
Basic parameters
Effect Level
Room Size
Seat Position
Detailed parameters
The following parameters are available on the "ADVANCED SETTING" panel. Depending on the selected program and input signals,
not all of the parameters can be adjusted.
Effect Trim
Rear Effect Trim
Initial Delay
Room Size
Liveness
Surround Delay
S. Initial Delay (Surround Initial Delay)
S. Room Size (Surround Room Size)
Reverb Time
Reverb Level
Reverb Delay
16
E-
Selects the level of effect sound from the three levels.
Selects the apparent size of the listening space from the three levels.
Selects the simulated listening position from the three positions.
Select a parameter by clicking its name, and adjust the
parameter by sliding the indicator at the bottom of the panel.
Makes fine adjustment of the level of the overall effect sound.
Makes fine adjustment of the level of the rear effect sound.
Adjusts the apparent distance from the sound source to the walls.
Adjusts the apparent size of the listening space.
Adjusts the apparent reflectivity of the walls.
Adjusts the delay time of the surround sound field.
Adjusts the initial delay time of the surround sound field.
Adjusts the apparent size of the surround sound field.
Adjusts the duration of reverberations.
Adjusts the level of reverberations.
Adjusts the delay time of reverberations.
How to adjust parameters
1. Select the program whose parameters you wish to
adjust. (Parameter adjustment is effective for the
currently selected program only.)
2. Select the DSP-EDIT tab at the bottom of the Main
Panel. The basic parameter screen appears.
3. This screen allows you to adjust the basic parameters.
Open the "ADVANCED SETTING" panel for adjusting
the detailed parameters.
Basic parameters
Opens the "ADVANCED
SETTING" panel.
Restores all parameters to their
default values.
Restores the basic parameter screen.

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Dp-u50

Tabla de contenido