Panasonic TH-42PX600U Manual De Instrucciones página 8

Accessories/Options
Preventing the plasma television from falling over
* The plasma TV must be fastened to both the base and the wall.
Accessories for pedestal security
1
Band (1)
Securing to a base
Accessories for pedestal security
1
Band (2)
Securing to a base
Front
Screw
Wood
Worktop
Fasten with wood screws in the holes in the back
edge of the wood worktop. If there are no holes,
first drill them in the middle of the thickness of the
wood worktop, and then fasten the strap with wood
screws.
8
For 42'' Plasma television
2
Screw (3)
Nominal diameter
4 mm x 10
screw
2
D
Wood screw
Band 1
Fasten with wood screws in the holes
in the back edge of the wood worktop.
If there are no holes, first drill them in
the middle of the thickness of the wood
worktop, and then fasten the strap with
wood screws.
For 50'' Plasma television
2
Screw (2)
Nominal diameter
4 mm x 12
D
Band
Wood Screw
3
Wood screw (1)
Securing to a wall
screw
3
4
Clamp
* Use strong wire or chain which is commercially
available to secure the plasma television to a
solid area of the wall or a pillar.
3
Wood screw (2)
Securing to a wall
Clamp
Screws on main body
Clamp
• Securing method
4
Clamp (2)
Wall
2
4
Clamp (2)
* Remove the screws at both
top corners on the rear side of
the plasma TV, and attach the
clamps 4 to the plasma TV
using the removed screws.
* Use strong wire or chain which
is commercially available to
secure the plasma television
to a solid area of the wall or a
pillar.