Whisking; Mashing Potatoes; Cleaning And Maintenance; Hand Blender - Cuisinart SmartStick CSB-100 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7. Select Speed, unlock, then press on the power button. Note: Due
to the powerful motor provided with this unit, Cuisinart
recommends using one hand to support the work bowl during
operation.
8. WHEN THE BLADE STOPS MOVING, unplug the unit, remove the
motor body from the chopper/grinder cover, and remove the
cover.
9. Carefully remove the chopping blade, holding it by the gripping
ridges on the plastic sheath. NEVER TOUCH THE BLADE
ITSELF.
10. Remove food with a spatula.

WHISKING

1. Insert the whisk attachment into the motor body. (See Assembly
for Whisk Attachment, page 7.)
2. Plug electrical cord into a wall socket.
3. Put the whisk into mixture to be blended.
4. Select Speed, unlock and press power button. The hand blender
will continue to run as long as the power button is pressed in.
To turn off, release the power button and the motor will stop.

MASHING POTATOES

1. Be sure potato masher is securely assembled.
2. Put potatoes or other food to be mashed in large bowl or pot.
3. Plug in unit and place head of potato masher into food.
4. Unlock and push power switch to turn masher on.
5. Slightly raise and lower masher as you move it through food until it
reaches texture you want.
6. Release power button to turn off masher before you lift it away
from the food.
7. Unplug unit.

CLEANING AND MAINTENANCE

HAND BLENDER

Always clean the motor body and blending shaft thoroughly after
using. Remove the blending shaft from the motor body. Clean the
motor body only with a sponge or damp cloth. Do not use abrasive
cleaners that could scratch the surface. To clean the blending shaft,
wash by hand in hot water using mild detergent or on top shelf of
dishwasher. Be mindful of the fixed razor-sharp blade edges.
9

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido