Set Your Clock; Oven Rack Position Guide - Cuisinart TOB-200 Manual Del Usuario

Set Your Clock

Plug the oven into a 120 volt AC outlet. The LCD display will be illuminated blue. Clock will read 12:00. To set clock, press and hold the Selector button until
the time starts flashing. Turn the Selector dial to set hour and then press it to select. To select "PM" scroll through past "11" until "PM" displays. Turn the
dial for minutes and then press to set.
Oven Sounds
You have the option of turning off the beeping sounds or making the beeps louder. To change the beep setting, press the ROTIS button and the Conv
button simultaneously for two seconds. The number "1" (default setting) will display. To deactivate all beeps, turn the Selector dial to 0 (zero), then press
Selector button to hold this setting. To change the beeps to a louder sound, turn the dial to "2", then press the button to hold this setting. If you unplug the
oven, all beeps will go back to the default "1" setting.

OVEN RACK POSITION GUIDE

All our recipes give you step-by-step directions and indicate where to
position the oven rack for best results. Please refer to the diagrams
below.
Position 1
Crumb Tray
The crumb tray is located in the front of the toaster oven. It can easily be removed for cleaning with its built-in pull-out handle. The crumb tray
should never be covered with foil.
Position 2
1
Baking and roasting: Use rack in position 1 or 2.
Toasting: Toasting should always be done in position 3. WARNING:
Placing the rack in position 1 or 4 while toasting may result in a fire.
Pizza: Rack should always be in position 3.
Broiling: Use rack in position 4.
Position 3
2
6
Position 4
3
4