Husqvarna SR600-2 Manual De Usuario página 223

• Keep first aid equipment close at hand.
Safety devices on the product
WARNING: Read the warning instructions
that follow before you use the product.
In this section the product's safety features, its purpose
and how checks and maintenance should be carried out
to ensure that it operates correctly. See instructions
Attachment overview on page 2 to
under the heading
find where these parts are located on your product.
The life span of the product can be reduced and the risk
of accidents can increase if product maintenance is not
carried out correctly and if service and/or repairs are not
carried out professionally. If you need further information
please contact your nearest servicing dealer.
WARNING: Never use a product with
defective safety components. The product's
safety equipment must be inspected and
maintained as described in this section. If
your product fails any of these checks,
contact your service agent to get it repaired.
CAUTION: All servicing and repair work on
the machine requires special training. This is
especially true of the machine's safety
equipment. If your machine fails any of the
checks described below you must contact
your service agent. When you buy any of
our products we guarantee the availability of
professional repairs and service. If the
746 - 002 - 13.12.2019
retailer who sells your machine is not a
servicing dealer, ask him for the address of
your nearest service agent.
Safety instructions for maintenance
WARNING: Read the warning instructions
that follow before you do maintenance.
WARNING: Always stop the product before
you do maintenance on the attachment. Be
careful, the attachment can continue to
move after the throttle/power trigger is
released. Make sure that the attachment has
stopped fully. If you have a gasoline
operated product, disconnect the HT leads
from the spark plug. If you have a battery
operated product, remove the battery.
• Check the entire product before starting. Replace
damaged parts.
• Check that all guards and covers are complete and
fastened securely. Check all nuts and screws.
• If you have a gasoline operated product, make sure
that there are no fuel leaks.
• Make sure that the brush drums are not damaged
and show no signs of cracking or other damage.
223