Guidance For Text Programming - Sharp XE-A113 Manual De Instrucciones

Guidance for text programming

The register allows you to program texts for department item names (page 19), PLU/subdepartment item names
(page 21), function texts (page 50), clerk names (page 22), logo messages (page 22), foreign and domestic
currency symbols (page 49), and training mode texts (page 50).
There are two ways for programming text; using character keys on the keyboard or entering character codes
with numeric keys on the keyboard. For the latter way, refer to "Entering character codes with numeric keys on
the keyboard" on page 43.
Using character keys on the keyboard
You can enter characters according to the small figures printed in the lower right position of the tops. For the
layout, please refer to "Keyboard" section on page 6.
The following are used as control keys for character entry:
H
Toggles between upper-case and lower-case letters. By default, the upper-case letter is selected. Once
H
the key is pressed, you are locked in for entering lower-case letters. "_" lights up at the SHIFT
position of the display when lower-case letters entry is selected.
N N
Press the
If you press the
mode.
N
Once the
NUMBER position of the display when numeric characters entry is selected.
W
Toggles between single-size and double-size characters. By default, the single-size character is
selected. Once the
up at the DC position of the display when double-size characters entry is selected.
B
Backs up the cursor, erasing the character to the left.
To program the word "Clerk01" with the letter "C" being double size.
To make the letter "C" double size character
To make character size return to normal size
To toggle the characters to lower-case letters
To enter numbers
14
key to enter numeric characters. For example to enter "1", press the
1
key without pressing the
key is pressed, you are locked in for entering numeric characters. "_" lights up at the
W
key is pressed, you are locked in for entering double size characters. "_" lights
N
key, the cash register goes to character codes entry
Wg
W
H
hijk
N01
N 1
and key.