Onkyo TX-8260 Manual De Instrucciones página 23

> Before Start > Part Names
Tuning into Stations by Frequency
It allows you to directly enter the frequency
of the radio station you want to listen to.
1. Press the TUNER button (a) of the
remote controller repeatedly to select
either "AM" or "FM".
2. Press D.TUN button (c) on the remote
controller.
3. Using the number buttons (b) on the
remote controller, enter the frequency of
the radio station within 8 seconds.
0 To enter 87.5 (FM), for example,
press 8, 7, 5 or 8, 7, 5, 0. If the
entered number is incorrect, press the
D.TUN button again and re-enter the
number.
Frequency step setting:
Press SETUP on the remote controller,
then use the cursor buttons and ENTER on
the remote controller to select "3.
Hardware" - "AM/FM", and select the
frequency step for your region. Note that
when this setting is changed, all radio
presets are deleted.
> Install > Initial Setup
c
> Playback
a
b
Supplementary information | Advanced Setup | Others
En 23