Onkyo TX-8260 Manual De Instrucciones página 26

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

> Before Start
> Part Names
∫ Controlling Remote Playback
from a PC
You can use this unit to play music files
stored on your PC by operating the PC
inside your home network. The unit
supports remote playback with Windows
®
Media
Player 12.
1. Turn on your PC and start Windows
®
Media
Player 12.
2. Open the "Stream" menu and check that
"Allow remote control of my Player..." is
checked. Click "Turn on media
streaming" to list players in the network.
3. Select and right-click the music file to
®
play with Windows Media
Player 12. To
remotely play a music file on another
server, open the target server from
"Other Libraries" and select the music
file to play.
4. Select this unit in "Play to" to open the
"Play to" window of Windows Media
Player 12 and start playback on the unit.
If your PC is running on Windows
click "Play to", and then select this unit.
If your PC is running on Windows
click "Cast to Device", and select this
unit. Operations during remote playback
are possible from the "Play to" window
on the PC.
5. Adjust the volume using the volume bar
on the "Play to" window.
0 Sometimes, the volume displayed on the
remote playback window may differ from
that appeared on the display of the unit.
Also, when the volume is adjusted from
this unit, this is not reflected in the "Play
to" window.
0 Remote playback is not possible when
26
> Install
using a network service or playing music
files on a USB storage device.
0 Depending of the version of Windows
there may be differences in the names of
items you can select.
Supported Audio Formats
This unit supports the following music file
formats. Remote play of FLAC and DSD is
not supported.
MP3 (.mp3/.MP3):
0 Supported formats: MPEG-1/MPEG-2
Audio Layer 3
0 Supported sampling rates: 44.1 kHz, 48
kHz
0 Supported bitrates: Between 8 kbps and
320 kbps and VBR
WMA (.wma/.WMA):
®
0 Supported sampling rates: 44.1 kHz, 48
kHz
®
0 Supported bitrates: Between 5 kbps and
8.1,
320 kbps and VBR
®
0 WMA Pro/Voice/WMA Lossless formats
10,
are not supported
WAV (.wav/.WAV):
WAV files include uncompressed PCM
digital audio.
0 Supported sampling rates: 44.1 kHz, 48
kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192
kHz
0 Quantization bit: 8 bit, 16 bit, 24 bit
AIFF (.aiff/.aif/.AIFF/.AIF):
AIFF files include uncompressed PCM
digital audio.
0 Supported sampling rates: 44.1 kHz, 48
> Initial Setup
> Playback
kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192
kHz
®
,
0 Quantization bit: 8 bit, 16 bit, 24 bit
AAC (.aac/.m4a/.mp4/.3gp/.3g2/.AAC/
.M4A/.MP4/.3GP/.3G2):
0 Supported formats: MPEG-2/MPEG-4
Audio
0 Supported sampling rates: 44.1 kHz, 48
kHz, 88.2 kHz, 96 kHz
0 Supported bitrates: Between 8 kbps and
320 kbps and VBR
FLAC (.flac/.FLAC):
0 Supported sampling rates: 44.1 kHz, 48
kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192
kHz
0 Quantization bit: 8 bit, 16 bit, 24 bit
LPCM (Linear PCM):
0 Supported sampling rates: 44.1 kHz and
48 kHz
0 Quantization bit: 16 bit
Apple Lossless (.m4a/.mp4/.M4A/.MP4):
0 Supported sampling rates: 44.1 kHz, 48
kHz, 88.2 kHz, 96 kHz
0 Quantization bit: 16 bit, 24 bit
DSD (.dsf/.dff/.DSF/.DFF):
0 Supported formats: DSF/DSDIFF
0 Supported sampling rates: 2.8 MHz, 5.6
MHz
0 Variable bit-rate (VBR) files are
supported. However, playback times
may not be displayed correctly.
0 Remote playback does not support the
gapless playback.
Supplementary information | Advanced Setup | Others

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido