Setting The Microwave; Cooling Fan; Memory; Saving Memory Settings - Bosch 2 Serie Instrucciones De Uso

Setting the microwave

Example: microwave power setting 600 W
1. Press the required microwave power setting.
The selected microwave power setting lights up in the
display, and "1:00 min" appears.
2. Set a cooking time using the rotary selector.

6WRS 6WDUW
   

I H 
Press the Start button.
3.
The cooking time counts down in the display.
The cooking time has elapsed
A signal sounds. Open the appliance door or press Stop. The
clock reappears.

Memory

You can save the settings for a dish in the memory and call it
up again at any time.
The memory is useful for if you frequently prepare a specific
dish.

Saving memory settings

Example: 360 W, 25 minutes
f
1. Press the button.
"M" appears in the display.
2. Press the required microwave power setting.
"M", the selected power setting and "1:00 min" appear in the
display.
3. Set the cooking time using the rotary selector.

6WRS 6WDUW
   
I
H

Confirm by pressing the
4.
The clock reappears. The setting is saved.
Note: You can save the memory settings and start the
appliance immediately. When finishing, instead of pressing the
f
button, press Start.


f
button.
Changing the cooking time
This can be done at any time. Change the cooking time using
the rotary selector.
Pausing
Press the Stop button once, or open the appliance door. Press
the START button after closing the door.
Cancelling operation
Press the Stop button twice, or open the door and press the
Stop button once.
Note: You can also adjust the cooking time first and then the
microwave power setting.
PLQ
NJ

Cooling fan

The appliance is equipped with a cooling fan. The fan may run
on even if the oven has been switched off.
Notes
The cooking compartment remains cold during microwave
■
operation. The cooling fan will still switch on. The fan may run
on even when microwave operation has ended.
Condensation may appear on the door window, interior walls
■
and floor. This is normal and does not adversely affect
microwave operation. Wipe away the condensation after
cooking.
Notes
You cannot save several microwave power settings one after
■
the other.
You cannot save automatic programmes.
■
Saving a new setting in the memory: press the
■
The old settings appear. Save the new programme as
described in steps 1-4.

Starting the memory

It is very easy to start the saved programme. Place your meal
into the appliance. Close the appliance door.
f
1. Press the
The saved settings are displayed.
2. Press the Start button.
The cooking time counts down in the display.
The cooking time has elapsed
A signal sounds. Open the appliance door or press Stop. The
clock reappears.
PLQ
NJ
Pausing
Press the Stop button once, or open the appliance door. Press
the START button after closing the door.
Cancelling the setting
Press the Stop button twice, or open the appliance door and
press the Stop button once.
button.
f
button.
23