Microwave Power Settings; Setting The Microwave - Bosch BFL634G.1 Instrucciones De Uso

Microwave power settings

The following microwave power settings are available.
The microwave power settings do not always
correspond to the exact wattage that the appliance
uses.
Setting Food
90 W For defrosting delicate foods
180 W For defrosting and continued cooking 1 hr 30 mins
360 W For cooking meat and for heating del-
icate foods
600 W For heating and cooking food
900 W For heating liquids
Default value:
The appliance provides a default cooking time for each
microwave output setting. You can accept this value or
change it in the appropriate area.
The maximum setting is for heating liquids. After a
certain period, the microwave's power output is reduced
to below maximum to protect the appliance.After a
cooling period, the microwave's full power will be
available once more.

Setting the microwave

Example: Microwave output 600 W, cooking time
5 minutes.
Press the on/off button
1.
appliance.
The appliance is ready to use. The maximum
microwave output is displayed as the default value in
the display. You can change this at any time.
Touch the field of the required microwave output.
2.
The microwave output and a default cooking time
are shown in the display. The
Turn the rotary selector to set the required cooking
3.
time.
Maximum cook-
ing time
1 hr 30 mins
1 hr 30 mins
1 hr 30 mins
30 mins
to switch on the
ÿ
field lights up red.
s
Press the start/stop button
4.
The cooking time counts down on the display.
Notes
When you switch on the appliance, the highest
■
microwave output always appears in the display as a
suggestion.
If you open the appliance door during use, the fan
■
may continue to run.
Cooking time elapsed
An audible signal sounds.
The operation has finished.
To stop the signal early:
Touch the field.
s
Press the on/off button
After touching the
Note:
appears; after a short time, it automatically disappears.
Press the again for the option to increase the
s
cooking time.
Changing the cooking time
This can be done at any time.
Change the cooking time using the rotary selector.
The operation continues.
Changing the microwave output
This can be done at any time.
Touch the field for the required microwave output.
The cooking time remains unchanged.
The operation continues.
If the set cooking time exceeds the maximum
Note:
time for the microwave output of 900 W, it is reduced
automatically. The operation stops. Press the
to start the operation.
Microwave en
to start.
l
to switch off the appliance.
ÿ
button, the timer function
s
l
button
11