General; Maintenance Schedule; Cleaning; External Cleaning - Husqvarna K6500 Ring Manual De Instrucciones

General

!
Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs.

Maintenance schedule

In the maintenance schedule you can see which parts of your machine that require maintenance, and with which
intervals it should take place. The intervals are calculated based on daily use of the machine, and may differ depending
on the rate of usage.

Cleaning

Functional inspection
*See instructions in the section "Machine's safety equipment".
** See instructions in the section "Blades" and "Assembly and settings".
Cleaning

External cleaning

• Clean the machine daily by rinsing it with clean water after the work is finished.
!
22 – English

MAINTENANCE

WARNING! The user must only carry out the maintenance and service work described
in this Operator's Manual. More extensive work must be carried out by an authorized
service workshop.
Inspection and/or maintenance should be carried out with the motor switched off and
the plug disconnected.
Wear personal protective equipment. See instructions under the "Personal protective
equipment" heading.
The life span of the machine can be reduced and the risk of accidents can increase if
machine maintenance is not carried out correctly and if service and/or repairs are not
carried out professionally. If you need further information please contact your nearest
service workshop.
Daily maintenance
External cleaning
General inspection
Water system
Throttle trigger*
Throttle lockout*
Blade guard*
Blade**
Support and guide rollers
WARNING! Do not use high-pressure washers to clean the machine.
Weekly maintenance/40 hours
Vibration damping system*
Drive belt
Monthly maintenance
Drive wheel