To Start The Engine - Husqvarna R112C Manual De Usuario

• To lower the cutting deck to mow position, press the
lock button and move the lift lever forward. If the
engine is on, the blades start to rotate.

To start the engine

1. For R112C, R115C, make sure that the drive system
is engaged, see To engage and disengage the drive
system, R112C, R115C on page 13 .
2. Lift up the cutting deck.
3. Apply the parking brake.
Note: For R112C, R115C, the parking brake is on
the left side. For R112C5, the parking brake is on the
right side.
14
4. For R112C5, put the gearshift lever in the neutral
position (N).
5. Put the throttle control in start position.
a) If the engine is cold, put the throttle control in
position (C), choke position.
B
A
b) If the engine is warm, put the throttle control
between positions (A) and (B).
B
A
6. Turn the ignition key to the start position.
N
C
C
831 - 001 - 15.06.2018