Guide Bar And Chain Combinations; Saw Chain Filing And File Gauges; Ec-Declaration Of Conformity - Husqvarna T425 Manual De Instrucciones

Guide bar and chain combinations

The following cutting attachments are approved for the model Husqvarna T425.
Guide bar
Length, inch Pitch, inch
10 1/4
10 3/8
Saw chain filing and file gauges

EC-declaration of conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the chain
saw for tree service Husqvarna T425 from 2009's serial numbers and onwards (the year is clearly stated in plain text on
the type plate with subsequent serial number), is in conformity with the requirements of the COUNCIL'S DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data. The following standards have been applied:
EN ISO 12100-2:2003, CISPR 12:2005, EN ISO 11681-2:2006
Notified body: TÜV Rheinland InterCert kft. Production Certification - H-1061, Budapest, Paulay Eden, 52 Hungary, has
carried out EC type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The
certificates for EC type examination in accordance with annex IX, have the numbers: M3 2992702 01
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna December 29, 2009
Bengt Frögelius, Development director chainsaw R&D
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
TECHNICAL DATA
Gauge, mm Max. nose radius
1,3 R10
1,3 7 T
Saw chain
Type Length, drive links (no.)
Husqvarna H00 60
Husqvarna H36 40
7
English – 37