Guide Bar And Saw Chain Combinations; Saw Chain Filing And File Gauges; Ec Declaration Of Conformity - Husqvarna 440e II TrioBrake Manual De Instrucciones

Guide bar and saw chain combinations

The following cutting attachments are approved for the models Husqvarna 440e II TrioBrake and 445e II TrioBrake.
Length,
Model
inch
13
15
440e TrioBrake,
16
445e TrioBrake
18
20
13
15
445e TrioBrake 16
18
20
Saw chain filing and file gauges
440e TrioBrake
445e TrioBrake
445e TrioBrake

EC Declaration of Conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain
saws for forest service Husqvarna 440e II TrioBrake and 445e II TrioBrake from 2013's serial numbers and onwards
(the year is clearly stated in plain text on the type plate with subsequent serial number), are in conformity with the
requirements of the COUNCIL'S DIRECTIVES:
- of May 17, 2006 "relating to machinery" 2006/42/EC.
- of December 15, 2004 "relating to electromagnetic compatibility" 2004/108/EC.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the Technical data chapter. The following standards have been applied:
EN ISO 12100:2010, ISO 14982:2009, EN ISO 11681-1:2011.
Notified body: 0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has carried out EC
type examination in accordance with the machinery directive's (2006/42/EC) article 12, point 3b. The certificates for EC
type examination in accordance with annex IX, have the numbers: 0404/09/2113 – 440e II TrioBrake, 0404/09/2118 –
445e II TrioBrake.
In addition, SMP, Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has certified conformity with
annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. The
certificates have the numbers: 01/161/074 - 440e II TrioBrake, 01/161/068 - 445e II TrioBrake.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna 8 April 2013
Bengt Frögelius, Development director chainsaw R&D
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
1155361-38 Rev.2 2014-11-25
TECHNICAL DATA
Guide bar
Gauge,
Pitch, inch
mm
0,325 1,3
0,325 1,5
Max. nose
Type
radius
10T Husqvarna H30
10T Husqvarna H25
Saw chain
Length, drive
links (no.)
56
64
66
72
78
56
64
66
72
78
English – 31