Handlebar With Control Panel - Advance SC400 Instrucciones De Uso

ENGLISH

HANDLEBAR WITH CONTROL PANEL

61. Handlebar
62. Program selection knob
63. Program: brush - vacuum system - solution flow activation
64. Program: brush - solution flow activation
65. Program: vacuum system activation
66. Machine switching off "0"
67. Solution flow push-button Press to reach the desired
quantity, as shown by LEDs (68).
NOTE
If the batteries are charged, the LEDs indicate the battery charge level only in the first 5 seconds after machine start-up.
When the batteries are nearly or fully discharged, the battery charge level is constantly shown. In this case, to see the
solution flow, the push-button (67) must be pressed.
61
70
8
INSTRUCTION FOR USE
64
65
68
SC400 - 9099626000
68. LED indicators with double function:
• Solution flow indicators
1 LED on:
Minimum "ECO" solution flow.
2 LEDs on:
Medium solution flow.
3 LEDs on:
Maximum solution flow.
LEDs off:
Closed solution flow.
• Battery charge indicators
Green LED:
Charged batteries
Yellow LED:
Nearly discharged batteries
Red LED:
The batteries are discharged
69. Machine start-up enabling push-button
70. Brush levers
71. Handlebar inclination adjusting lever
62
63
66
69 67
.
.
.
71
70
P100622