TFA STRATOS Instrucciones De Manejo página 12

TFA_No_35.1077_Anleitung_01/11
1) Base station
With the foldable leg at the back of the unit, the base station can be placed
onto any flat surface or wall mounted at the desired location by the hanging
hole at the back of the unit.
2) Remote sensor
For accurate results, the remote sensor mast should be securely mounted onto a
horizontal surface and in an open area away from trees or other coverings
where rainfall or wind speed may be reduced causing inaccurate reading.
a.) Mounting the wind sensor
Assemble the mast. Firstly, check that the wind-fan can rotate freely before fix-
ing the unit. The wind sensor should now be mounted using the screw onto a
mast provided to allow the wind to travel around the sensor unhindered from
all directions.
22
24.01.2011 13:40 Uhr Seite 12
STRATOS –
Wireless weather station
STRATOS –
Wireless weather station
b.) Mounting the rain sensor
c.) Mounting the thermo-hygro sensor same as rain sensor
d.) Fix the whole set to a pole with the two adjustable hoops.
Once the wind sensor and
rain sensor are fixed onto
the mast, connect the cable
to the corresponding ther-
mo-hygro sensor socket.
23