Basic Operation - Velleman CS400 Manual Del Usuario

LCD Display
A DISC/NOTCH range indication
B target indicator
C
operating mode
7. Assembly
Refer to illustrations A to D on page 3 of this manual.
1. Join the search coil and the lower stem. Tighten the bolt.
2. Press the silver button on the upper end of the lower stem and slide the lower stem into the upper
stem. Adjust the stem to a length that you feel comfortable when you stand upright with the
detector in your hand and the search coil is level with the ground, your arm relaxed at your side.
3. Wind the cable from the search coil around the stem. Insert the coil's plug into the jack on the
control housing.
4. Assembly the arm support. Press the silver button on the upper end of the stem and insert the
aluminium end of the arm support.
Do not over-tighten the search coil or use tools such as pliers to tighten it.
The search coli's plug fits into the jack only one way. Do not force the plug and do
not pull on the cable to avoid damage.
Adjusting the Armrest
The standard position of the armrest is comfortable for most people. Very large or short forearms can be
accommodated by adjusting the armrest accordingly.
The armrest is adjustable in three positions. To adjust, remove the screw from the underside. Then,
move the armrest to one of the alternate positions. Re-install the screw.
8. Batteries

This metal detector uses 2x 9 V alkaline batteries (not included).

Only use fresh batteries. Do not mix old and new batteries or different types of batteries.

Replace the batteries with new ones when the battery icon is blinking.
Installation
Refer to illustration E on page 3 of this manual.
1. Switch off the metal detector.
2. Slide the battery cover in the direction of the arrow.
3. Take out the two battery connectors from the compartments.
4. Connect a battery to each connector. Mind the polarity.
5. Re-install the battery cover and close the compartment.
Do not puncture or throw batteries in fire as they might explode.
Do not attempt to recharge non-rechargeable batteries.
Dispose of batteries in accordance with local regulations.
Keep batteries away from children.
Remove the batteries from the battery compartment when the metal detector is
not in use.
9.

Basic Operation

9.1 Code of Conduct

Do not interfere with archaeological sites or ancient monuments. Join your local archaeological
society if you are interested in ancient history.

Do not leave a mess. Use a sharpened trowel or knife to cut a neat circle or triangle, extract the
object and carefully replace the soil and the grass.

Help keep your country tidy. Bottle tops, silver paper and tin cans belong in a waste bin. Rusty iron
and other scrap should be collected and taken to a specialized company for further handling.

Do not trespass: ask permission before venturing onto private property.
V. 02 – 15/07/2015
CS400
D status indication
E sensitivity graph
F
depth graph
6 ©Velleman nv