Intended Use; Safety Instructions; Supplied Components - Flex ALR 411 M Instrucciones De Funcionamiento

Intended use

This rotational laser is designed for industrial
applications.
The power tool is designed to determine,
transfer and check horizontal courses, vertical
lines, alignments, perpendicular points and
right angles, e.g.:
– to transfer metre and height cracks,
– to mark partition walls (vertical and/or
at a right angle) and
– to align equipment and controls in three
dimensions.
The power tool is authorised for outdoor use.

Safety instructions

Danger!
– Keep children away from laser power
tools.
– It is not permitted to tamper with or
change the power tool. Do not disable
safety devices and do not remove
information and warning signs.
– Before switching on the power tool,
check for visible damage. Do not switch
on damaged power tools.
– The power tool may be repaired by
authorised technicians only. If the power
tool is opened without authorisation,
laser radiation may be emitted which
exceeds class 2.
– Do not use the power tool in an explosive
environment.
– If carrying out alignment work on ladders,
avoid an abnormal posture. Ensure that
you have a secure footing and keep your
balance.
12
Damage to property!
– If the power tool is brought from a cold to
a warm environment or vice versa, leave
the power tool to acclimatise before
using it.
– If using adapters and tripods, ensure that
the power tool has been firmly screwed
down.
– Before packing the power tool in the
transportation case, dry the power tool
and accessories with a cloth.
– Transport the power tool in the
appropriate transportation case only.
– If shipping the power tool or
disconnecting it for a prolonged period,
isolate the batteries or take them out of
the power tool.
Damage to the environment!
– Dispose of power tool and batteries in
accordance with the currently valid
national directives. If in doubt, contact
the manufacturer or supplier.

Supplied components

Rotational laser ALR 411 M
4x AA batteries for ALR
Remote control including 9 V unit
Transportation case
Rotational laser